Descargar Imprimir esta página

Powerplay PJR 2000PC Instrucciones De Montaje, Cuidado Y Uso página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION
SAFETY INFORMATION
SAFETY INFORMATION
Store the power washer indoors to prevent
IMPORTANT:
the water in the unit from expanding under freezing
conditions. When the water freezes and expands, your
power washer will be damaged and become inoperable.
Or, if storing outdoors, it is recommended you use pump
saver (not included) to protect pumps.
25.
use hot water with your power washer. It will
NEVER
overheat and damage the high pressure pump.
26.
leave the power washer unattended while it
NEVER
is powered "ON".
27.
turn the water supply "ON " before turning
ALWAYS
the power washer power to "ON". Running the pump
dry will cause damage to the internal components.
28.
use a water supply to your power washer
NEVER
that exceeds 150 PSI maximum.
29.
disconnect the high pressure hose from the
NEVER
power washer while the system is pressurized.
30.
permanently engage the trigger mechanisms
NEVER
on the spray gun.
31.
operate the power washer unless all
NEVER
components are properly and securely connected.
94260_PJR 2000 PC ENG-FR-SP .indd 5
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
32.
allow the power washer pump to run for
NEVER
more than one minute after you have turned off the
water supply. This can cause the motor and pump to
overheat and fail.
33.
use lances or other parts that are not
NEVER
compatible for this specific Powerplay unit.
34.
spray any electrical outlet with your power
NEVER
washer.
35. Inspect the power cord before using.
it is damaged.
use it if
DO NOT
5
17/2/17 上午10:14

Publicidad

loading