Descargar Imprimir esta página

BriskHeat BH-610 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6.5.2
Manual selection of sensor
List of all sensors (including auto detectible) will show up in menu. Please, select matching sensor type
out of list and confirm by pressing enter
.
6.6
Unit
Selection between degree Celsius and degree Fahrenheit is available
6.7
Language
Languages available: Japanese, English and German
(note: English wording accompanies all languages in this point of menu)
6.8
System info
Information about the product: firmware and hardware version
7
Controller On / Off
The controller switches automatically on with the power supply connected.
On/ Off of controller: simultaneous pressing Up Button
8
Terminal connections
BH-610:
K1:
Do not change the wiring on this terminal! Otherwise the device might be damaged or will malfunction!
K1a: Power supply and heating unit, Conductors up to 16 mm
• L: Clamp for phase conductor
• N: Clamp for neutral conductor
• PE: Protective Earth conductor
®
© BriskHeat
Corporation
BH-510 & BH-610 Operation
Manual
and Down Button
for several seconds
2
or AWG 6
®
. All rights reserved.
9
For BH-510:
Line unfused: Clamp for phase; power supply for currents >10 A or >2300 W at 230 VAC / 1100
W at 110 VAC. Protection against overload and over-currents has to be secured by
external fuse!
Line 10 A Fuse int.: Clamp for phase; power supply for currents <10 A or <2300 W at 230 VAC /
1100 W at 110 VAC. Fix mounted fuse inside controller.
N: Clamp for neutral conductor of power supply
N Heat: Clamp for neutral conductor of heater
L Heat: Clamp for phase of heater
K2: Thermocouples (Polarity!)
K3: Resistance temperature sensors. (Pt100/1000, Nickel120, NTC10k/100k, etc.)
2-wire sensor, clamps K3.1 and K3.4


3-wire sensor, clamps K3.1, K3.2 and K3.4

4-wire sensor, clamps K3.1, K3.2, K3.3 and K3.4
K4: Potential-free signal for external monitoring or control systems
Earth Connection: Screw thread for earth connection of controller and heater (cable lug supplied)
®
© BriskHeat
Corporation
BH-510 & BH-610 Operation
Manual
®
. All rights reserved.
10

Publicidad

loading

Este manual también es adecuado para:

Bh-510