Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Instructions
6
7
H
G
8
H
1
D
G
G
2
Hold back the collar at one end of the end of the hose
(G). Push firmly to connect hose fitting to the water outlet
tube on the front of the power washer unit (D). Twist the
collar clockwise to secure. Confirm hose is locked into
the water outlet by slightly pulling on the hose.
Note: DO NOT use pliers or locking pliers to tighten.
Push firmly to connect hose fitting (G) to spray gun (H).
Confirm hose is locked into spray gun by slightly pulling on
them.
To remove the hose, push the button on lower front of gun
to release the hose (G) connection from the spray gun (H).
8
Publicidad
