STEP 3 – Side of the head
•
With the 3mm or 6mm guide comb attached, trim sideburns. Then change to the longer
9mm guide comb and continue to cut the top of the head.
STEP 4 – Top of the head
•
Use the longer length fixed combs of 12mm or 18mm to cut hair on top of the head
against the direction in which the hair normally grows.
•
Always work from the back of the head.
STEP 5 – The finishing touches
•
Use the clipper without an attachment comb for close trimming around the base and
sides of the neck.
•
To produce a clean straight line at the sideburns, reverse the hair clipper. Place the
reversed clipper at right angles to the head, tips of the blades lightly touching the skin
and then work downwards.
TAPER LEVER
•
The taper lever adjusts the length of cut when not using comb attachments.
•
It is suggested to set the blades closest together when using the comb attachments.
Half grade sizes can be achieved by using the taper lever with comb attachments.
CARE FOR YOUR HAIRCLIPPER
AFTER EACH USE
•
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
•
Ensure the appliance is switched off and unplugged from the mains before cleaning.
•
Brush the accumulated hair from the blades and body of the clipper. Do not submerge
the clipper in water.
•
We recommend oiling the blades after cleaning with a little sewing machine oil.
•
Note: Ensure the clipper is turned off when cleaning.
EVERY SIX MONTHS
•
At regular intervals the blade set should be removed and cleaned.
•
The blade set can be removed and reinstalled by using a screwdriver.
•
Brush out hair and do not use water or cleaners on the blade set or internal body
housing.
CAUTION:
•
Do not use liquid cleaners on the blades or harsh or corrosive chemicals on the blade
casing. Always use a soft brush to remove the accumulated hairs.
•
Always store this appliance and cord in a moisture-free area.
•
Do not wrap the supply cord around the appliance.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
5