Inglesina Culle Manual De Instrucciones página 14

WITHOUT HANDLE
HOW TO HOOK THE HOOD
1 Insert the two ends A in the suitable seats in
the carrycot.
Hook the buttons located externally in the
head side of the carrycot.
HOW TO RELEASE THE HOOD
2 Press in correspondence of the joint and
remove temporarily the hood.
HOOD ADJUSTMENT
3 Accompany the hood in the desired position.
Where present, bend first the compass B that
maintains blocked the hood.
FASTENING THE COVER
4 Fasten all buttons of the cover to the carrycot.
REMOVING THE INTERNAL LINING
5 It is possible to remove the internal lining as
shown in the figure.
ADJUSTING THE BACKREST
6 Operate on the lever C to adjust the backrest:
once you reach the desired inclination, re-
position the bar in the starting position.
INTERNAL VENTILATION
7 It is possible to adjust internal ventilation
through the lever D.
TRANSPORT HANDLES
8 Extract the transport handles from the side
pockets.
9 CAUTION: when you transport the carrycot
maintain it always in horizontal position.
HOOKING THE CARRYCOT TO THE FRAME
10 The carrycot is hooked to the frame thanks
to the patented system EASY CLIP: position
correctly the carrycot on the frame until you
fell a hooking CLICK.
11 CAUTION: make sure that the carrycot is
always correctly hooked before use.
RELEASE OF THE CARRYCOT FROM THE
FRAME
12 Insert the two hands into the side openings: act
13 on the two levels and thus remove the carrycot.
14
INSTRUCTIONS
HOW TO HOOK THE HOOD
14 Lift the big handle acting on the side buttons
at the same time.
15 Hook the press studs to the structure of the
carrycot.
16 Wrap the hood around the handle, fixing it with
suitable buttons.
HOOD ADJUSTMENT
17 Act on the two side buttons of the big handle
at the same time.
FASTENING THE COVER
18 Fasten all buttons of the cover to the carrycot.
REMOVING THE INTERNAL LINING
19 It is possible to remove the internal lining as
shown in the figure.
ADJUSTING THE BACKREST
20 Operate on the lever C to adjust the backrest:
once you reach the desired inclination, re-
position the bar in the starting position.
INTERNAL VENTILATION
21 It is possible to adjust internal ventilation
through the lever D.
TRANSPORT BIG HANDLE
22 Hold the big handle passing with the hand
through the padding.
CAUTION: when transporting the carrycot,
keep it always in horizontal position.
HOOKING THE CARRYCOT TO THE FRAME
23 The carrycot is hooked to the frame thanks
to the patented system EASY CLIP: position
correctly the carrycot on the frame until you
fell a hooking CLICK.
24 CAUTION: make sure that the carrycot is
always correctly hooked before use.
RELEASE OF THE CARRYCOT FROM THE
FRAME
25 Act on the lever E located externally to the feet
26 side and lift it at the same time grabbing it from
the big handle.
WITH BIG HANDLE