Descargar Imprimir esta página

Yamaha RHINO YXR660F Manual Del Propietário página 324

Publicidad

1. Bolt (× 3)
1. Vis (× 3)
1. Perno (× 3)
1. Tailpipe
1. Chicane
1. Tubo trasero
2. Spark arrester
2. Pare-étincelles
2. Parachispas
Cleaning the spark arrester
Be sure the exhaust pipe and muffler are cool be-
fore cleaning the spark arrester.
1. Remove the bolts.
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
4. Insert the tailpipe into the muffler and align
the bolt holes.
5. Install the tailpipe by installing the bolts, and
then tighten the bolts to the specified torque.
Tightening torque:
Tailpipe bolt:
9.5 N·m (0.95 m·kgf, 6.9 ft·lbf)
8-77
EVU01660

Publicidad

loading