Gaggenau VG 491 211 Instrucciones De Instalación página 17

3.
Turn the control knob counterclockwise to position 12
(E).
4.
Turn the control knob clockwise to position 1 (F).
5.
Turn the control knob counterclockwise to position 0
(G). Wait until the illuminated ring turns yellow (H).
6.
Set the gas type on the control knob (I), the currently
selected position will turn green:
Control knob position
7
9
7.
Keep the control knob at the desired setting for at
least 5 seconds. The illuminated ring around the
control knob will turn green (I).
8.
To save the setting, it is necessary to exit the menu as
follows: Turn the control knob to position 0 (J). Then
turn the control knob counterclockwise to position 12
(K).
Gas Type
NG A 6" WC
Propane 10" WC
Conversion to another type of gas
Turn the control knob clockwise to position 1 (L). Turn
the control knob counterclockwise to position 0 (M).
Wait until the illuminated ring goes out (N).
The setting is saved. The illuminated ring around the
control knob will turn yellow for a second. Wait until the
illuminated ring goes out.
Checking functions after the conversion:
The flames are adjusted correctly if no yellow tips are
visible. They must not go out when switching over swiftly
from the high to the low setting.
Note: Stick the adhesive label included with the nozzle
set over the rating plate of the appliance to document the
changeover to a different gas type.
en-us
17