Silvercrest SSTMC 600 A1 Instrucciones De Uso página 18

Cleaning the motor block
1) Clean the surfaces with a damp cloth . If necessary, apply a mild washing-up
liquid to the cloth . Afterwards, wipe off with a cloth moistened only with
water to ensure that no detergent remains on the appliance . Then dry the
surfaces thoroughly .
2) When cleaning, always check that the contact switch in the fitting for the
blender 3 is not blocked by soiling residues . If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services . Do not use any hard objects, these could damage the contact
switch .
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter "Cleaning") .
2) Wrap the power cable around the cable retainer 7 on the base of the
motor block 6 .
3) Store the blender in a cool and dry location .
Disposal
Do not dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/EU .
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility . Please comply with all applicable regulations .
Please contact your waste disposal facility if you are in any doubt .
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product .
The product is recyclable, subject to extended producer responsibility and is
collected separately .
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary . The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites .
The packaging is made from environmentally friendly material and can be
disposed of at your local recycling plant .
SSTMC 600 A1 GB │ IE │ 15 ■