Silvercrest SSTMC 600 A1 Instrucciones De Uso página 9

WARNING! RISK OF INJURY!
Always make sure that the blender is switched off before
►
removing the jug from the motor block!
Use the blender only with the supplied motor block!
►
CAUTION! MATERIAL DAMAGE!
Do not use the appliance in direct sunlight or near any
►
heatgenerating appliances .
NEVER fill the blender with boiling liquids or other foods!
►
Allow these to cool to a lukewarm temperature .
NEVER operate the appliance when it is empty, i .e . without
►
ingredients in the blender attachment .
Unpacking
■ Remove all packaging materials or protective films from the appliance . Retain
the packaging, so that you can store the appliance safely or send it by post,
e .g . if it needs to be repaired .
■ Before using the appliance, check that it is free of damage; check also that
the power cable and plug as well as all accessories and appliance parts are
undamaged .
■ Clean all components carefully before using the appliance for the first time
(see "Cleaning") .
Setting up
Once all components have been cleaned as described in the section "Cleaning":
■ Position the appliance so that, ...
–
that the mains cable passes through the recess at the rear of the
appliance,
–
the power plug is immediately accessible, so that it can be quickly
withdrawn in the event of danger,
–
that it is stable and not liable to slip, and so that the sucker feet can
attach firmly and the appliance cannot tip over due to vibration,
–
that the mains cable is not in the working area and thus does not present a
risk of being inadvertently snagged and tipping the appliance over .
■ 6 │ GB │ IE
SSTMC 600 A1