FITFIU FITNESS BESP-50 Manual Usuario página 41

STEP 4
Screw the right pedal (11) onto the right hand crank (15) and tighten it. Select the right pedal strap (13) that has the
letter R marked on the bottom of the belt. Snap the end of the two holes into the inside edge of the right pedal (11).
Snap the other end into the outer edge of the right pedal (11). Select the adjustment holes that allow the foot to be
easily removed from the pedals.
Follow the same procedure to attach the left pedal (12) to the left crank (16) and adjust the left pedal strap (14) to the
left pedal (12).
NOTA: The right pedal (11) has an R stamped on the end of the pedal shaft. It has a right hand
thread and is tightened by turning clockwise. The left pedal (12) has an L stamped on the end of
the pedal shaft. It has a left-hand thread and is tightened by turning counterclockwise.
Please make sure that the pedal nut is threaded into the crank hole properly. It is a good idea to grease the threads
before attaching them to the crank, this will ensure that they can be removed in the future. Tighten both pedals as
firmly as possible. After using the stationary bike for one week, retighten the pedals. For best performance, keep the
pedals tight.
14
12
Anti-Clockwise
16
15
41
BESP-50
13
Clockwise
11
EN