Squeegee Installation - Nilfisk-Advance Condor BR 1100S serie Instrucciones De Uso

SQUEEGEE INSTALLATION

1 See Figure 5. Slide the Squeegee Assembly (17) onto the squeegee mount bracket and tighten the Squeegee Mount Thumb Nuts (AA).
2 Connect the Recovery Hose (BB) to the squeegee inlet using Hose Clamp (CC).
3 Lower the squeegee, move the machine ahead slightly and adjust the squeegee tilt and height using the Squeegee Tilt Adjust Knob (22) and Squeegee
Height Adjust Knobs (28) so that the rear squeegee blade touches the fl oor evenly across its entire width and is bent over slightly as shown in the squeegee
cross section.
FIGURE 5
FORM NO. 56041633 - Condor™ / BR 1100S series - A-13
ENGLISH / A-13