Steam Supply Connections; Control Valves (Sakv******) Kits For Pressurized Steam Supplies; Fitting Kits (Sakr******) For Threaded Control Valves; Kit Attuatori Per Valvole Di Regolazione - Carel ultimateSAM Manual Del Usuario

5.1 Control valves (SAKV******) kits for
pressurized steam supplies
A control valve is needed to regulate the fl ow of pressurized steam
to an ultimateSAM distributor. Actuators for the control valve are
sold separately. If a valve and actuator kit was not ordered with the
ultimateSAM distributor, refer to the design manual for information on
how to size and select a control valves and actuators. Information on
actuators is provided in section 4.2.
The codes for valve kits are shown in table 4.a.
SAKV 0
1 2

ID prefi x

0 0

Material F = Cast iron
S = Stainless steel
0 = Brass (only for North America)

Operating 0 = Up to 1 bar (15psi) (only for North America)
pressure H = 1-4 bars (15-50psi) (only for North America)
F = 0.1-4 bars (1.45-50psi )

Nominal size A= 0.4
Kv (EU) B= 0.63
Cv (US) C= 1
D= 1.6
E= 2.5
F= 4
G= 6.3
H= 10
I= 16
J= 25
K= 40
L= 63

Region U = North America
0 = Other

--- ---
Specifi cs regarding the inlet connection on available control valves are
shown in Table 4.b.
Inlet-Outlet Connections
Material, Pressure, Region Codes
*****FH*0* -
Valve Size
*****SF*0*
SAKV0**C*0 Flange DN 15
SAKV0**D*0 Flange DN 15
SAKV0**E*0 Flange DN 15
SAKV0**F*0 Flange DN 15
SAKV0**G*0 Flange DN 20
SAKV0**H*0 Flange DN 25
SAKV0**I*0 Flange DN 32
SAKV0**J*0 Flange DN 40
SAKV0**K*0 Flange DN 50
SAKV0**L*0 Flange DN 65
If the inlet pressure to the control valve is greater than 0.7 bar (10 psig),
the valve may generate signifi cant noise due to the near sonic velocity of
the steam. (See section 6.1 of the design manual for more information.)
Because the noise and coincident vibration may shorten valve life,
frequent inspections of the valve may be required.
For information about the weight, dimensions, construction materials,
and rangeability of each valve, see the "Technical specifi cations" manual.

5. STEAM SUPPLY CONNECTIONS

x x x x 0
3
4 5 6
7
Tab. 5.a
*****00*U* *****0H*U*
½" NPT Fem. ½" NPT Fem.
½" NPT Fem. ½" NPT Fem.
½" NPT Fem. ½" NPT Fem.
½" NPT Fem. ½" NPT Fem.
¾" NPT Fem. ¾" NPT Fem.
1" NPT Fem. 1" NPT Fem.
1¼" NPT Fem. 1¼" NPT Fem.
1½" NPT Fem. 1½" NPT Fem.
2" NPT Fem. not available
not available not available
Tab. 5.b
5.2 Fitting kits (SAKR******) for threaded control
valves
Nota: For fl anged control valves, the installer must provide the
appropriate fi ttings and piping to connect the valve to the
ultimateSAM distributor.
For control valves having threaded connections, optional fi tting kits are
available to facilitate the connection of the valve to both the distributor inlet
and the steam traps and strainers (section 4.3). The codes for the fi tting kits are
shown in table 4.c.
SAKR
1

Prefi sso

0 0

Materiale F = Ghisa
S = Inox

Taglia 24= ½"
34= ¾"
44= 1"
54= 1 ¼" Tubo
64= 1 ½" Tubo
84= 2"

Mercato U = North America

--- ---
Both iron and stainless steel fi tting kits for the North American region
have NPT threads. The list of threaded pipe fi ttings provided in each kit is
shown in table 4.d.
Fitting List for SAKR0***U0
Pipe Size Bushing
(NPT) F-M (size)
******24** 2 (½"x1")
******34** 2 (¾"x1")
******44** n/a
******54** 2 (1¼"x2")
******64** 2 (1½"x2")
******84** n/a

5.3 Kit attuatori per valvole di regolazione

Each control valve needs an actuator to control its motion. The system for
identifying actuator kits is shown in Table 4.e. Note: Not all of the possible
combinations shown on the table are available. Tables 4.f and 4.g indicate
which electronic or pneumatic actuator can be paired with which control
valve.
SAKA
1

ID prefi x

0 0

E = Electronic
Type:

Identifi er: 01 Sequential #
02
---

Region: U = North America

--- ---
Electronic actuator selection
Valve Size *****FH*0*
SAKV0**A*0 not avail.
SAKV0**B*0
SAKV0**C*0 SAKA0E0200
"SAKV0**D*0 SAKA0E0200
SAKV0**E*0
SAKV0**F*0 SAKA0E0200
SAKV0**G*0 SAKA0E0200
SAKV0**H*0 SAKA0E0200
SAKV0**I*0 SAKA0E0200
"SAKV0**J*0 SAKA0E0200
SAKV0**K*0
SAKV0**L*0 SAKA0E0200
19 "ultimateSAM - user" +0300070ES - rel. 1.0 - 23.05.2013
0 x x x U 0
3 4
2 5 6
Tubo
Tubo
Tubo
Tubo
3" Nipple Union
M-M (size) F-F (size)
2 (1/2") 1 (1")
2 (3/4") 1 (1")
2 (1") 1 (1")
2 (1 1/4") 1 (2")
2 (1 1/2") 1 (2")
2 (2") 1 (2")
x x
0 x x 0
2 3 4
5 6
P = Pneumatic
0 = Others
Material, Region Codes
*****SF*0* *****00*U* *****0H*U*
not avail. SAKAE001U0 not avail.
SAKA0E0300 SAKAE001U0 SAKAE002U0
SAKA0E0300 SAKAE001U0 SAKAE002U0
SAKA0E0300 SAKAE001U0 SAKAE002U0
SAKA0E0300 SAKAE001U0 SAKAE002U0
SAKA0E0300 SAKAE001U0 SAKAE002U0
SAKA0E0300 SAKAE002U0 SAKAE002U0
SAKA0E0300 SAKAE002U0 not available
SAKA0E0300 not available not available
ENG
Tab. 5.c
Tab. 5.d
Tab. 5.e
Tab. 5.f