Publicidad
Idiomas disponibles
Idiomas disponibles
A - ENGLISH
SIDE BROOM MAINTENANCE
The side broom(s) move dirt and debris away from walls or curbs and into the path of the main brushes. Adjust the side broom(s) so that the bristles are
contacting the oor from the (A) to (B) area shown in Figure 7 when the broom is down and running.
To adjust the Side Brooms...
1
The side broom(s) are adjusted simply by pressing either the Side Broom DOWN Switch (53a) or the Side Broom UP Switch (53b). NOTE: Broom setting
resumes each time brooms are lowered but adjustment will be needed as brooms wear or are replaced.
NOTE: The machine should be stored with the Side Brooms in the raised position. The Side Brooms should be replaced when the bristles are worn to a length of
3 inches (7.62 cm) or they become ineffective. Side brooms should be replaced in pairs as they are not independently adjustable for proper height.
To replace a Side Broom...
1
Raise the Side Broom(s).
2
Remove the large Thumb Nut (C) and remove the Side Broom (D). NOTE: The right side Thumb Nut (C) has right handed threads and the left side Thumb
Nut (C) has left handed threads.
3
Install the new broom by sliding it UP onto the shaft and re-install the Thumb Nut (C).
FIGURE 7
A - 22
INSTRUCTIONS FOR USE
SC8000 - 56091075
3/13
Publicidad
