Cables Table - V2 ELETTRONICA City1 Manual De Instrucciones

For the wiring to the control unit refer to the following table:
CONNECTION
NETWORK
ACTUATOR
EXTERNAL ANTENNA
FLASHING LIGHT
ELECTRO LOCK
OTHER WIRINGS
WARNING: To assemble a PG cable gland higher than 9 it is necessary to enlarge the pierce on the plastic shell. Instead of the
cable gland, it is possible to use flexible pipes with IP55 connection.

CABLES TABLE

SUITABLE CABLE
[N° WIRES PER SECTION]
3 x 1.5 mm 2
4 x 1 mm 2
SCREENED RG58
2 x 1.5 mm 2
2 x 1.5 mm 2
MULTIPOLAR
n x 0.25 - 0.5 mm 2
(n) depending on the number of
wirings to be made
SUITABLE CABLE GLAND
PG9: For cables with external Ø from 5 to 8 mm
PG9: For cables with external Ø from 5 to 8 mm
PG9: For cables with external Ø from 5 to 8 mm
PG9: For cables with external Ø from 5 to 8 mm
PG9: For cables with external Ø from 5 to 8 mm
PG9: For cables with external Ø from 5 to 8 mm
PG11: For cables with external Ø from 7 to 10.5 mm
PG13.5: For cables with external Ø from 9 to 12.5 mm
47