Black and Decker BD200MTB Manual De Instrucciones página 9

Problem
• Unit will not start.
working
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK+DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are listed on page 12 and 13
and are available from your local dealer or authorized service center. In addition to
BLACK+DECKER accessories, your oscillating tool will also accept Porter Cable
and Stanley FatMax
accessories, please call: 1-800-544-6986.
WARNING:
The use of any accessory not recommended for use with this tool could
be hazardous.
Service Information
All BLACK+DECKER Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the BLACK+DECKER
location nearest you. To find your local service location, call: 1-800-544-6986 or visit
www.blackanddecker.com
Troubleshooting
Possible cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
®
oscillating tool accessories. If you need assistance regarding
9
Possible Solution
• Plug tool into an
outlet.
• Replace circuit fuse. (If
the product repeatedly
causes the circuit fuse
to blow, discontinue
use immediately and
have it serviced at a
BLACK+DECKER
service center or
authorized servicer.)
• Reset circuit breaker.
(If the product
repeatedly causes the
circuit breaker to trip,
discontinue use
immediately and have
it serviced at a
BLACK+DECKER
service center or
authorized servicer.)
• Have cord or switch
replaced at a
BLACK+DECKER
service center or
authorized servicer.)
®