Operating And Safety Instructions - Chauvin Arnoux C.A 6630 Manual De Instrucciones

Battery Tester C.A 6630

OPERATING AND SAFETY INSTRUCTIONS

•
Observe the recommended operating conditions: temperature, humidity,
altitude, degree of pollution, etc.
•
Use only accessories supplied with the instrument, and compliant with the
safety standards in force.
•
Use only batteries of the recommended type and rating to power the
instrument, failure to do so may damage the instrument and render the
warranty void.
•
Switch the instrument off when not in use.
•
Before opening the instrument, check that all the terminals are
disconnected and that the instrument is switched off.
•
All repairs and metrological checks must be carried out by only qualified
approved personnel.
•
Do not measure DC voltages greater than 50V, failure to do so may
damage the instrument and render the warranty void.
•
Do not measure AC voltages, failure to do so may damage the instrument
and render the warranty void.
•
After carrying out measurements on a high-voltage battery and before
carrying out further measurements, short-circuit the measurement cords to
eliminate any DC capacitive charge, liable to damage a low-voltage
battery.
22
English