Threading The Machine - Janome 3128 Manual De Instrucciones

Janome 3128 Instruction Manual
1
3
4
2
5
1
1
2
3
4 5
2
www.toews.com

Threading the Machine

• Threading the machine
* Place the felt cushion on the spool pin first
and then the spool of thread. The end of the
thread should be coming off the spool as
shown.
* Raise the thread take-up lever to its highest
position by turning the handwheel counter-
clockwise.
* Raise the presser foot to release the thread
tension.
Draw the end of thread around the thread
1
guide.
Thread guide
1
While holding the thread near the spool, draw
2
the end of the thread down along the right
channel and around the bottom of the guide
plate.
Firmly draw the thread up along the left
3
channel. Slip the thread into the slot of the
thread take-up lever from right to left and
down into the take-up lever eye.
Slide the thread behind the needle bar thread
4
guide on the left.
Needle bar thread guide
2
Thread the needle from front to back.
5
3128 Owners Manual/ User Guide
16
Janome Sewing Machine