Bosch MUM50149 Instrucciones De Uso página 19

Do not change tools until the drive has come to a standstill – when
the appliance is switched off, the drive continues running briefly and
stops in the tool change position. Do not move the swivel arm until
the tool has come to a standstill. For reasons of safety the appliance
cannot be operated unless unused drives are covered with drive
guards.
Before attaching / removing the continuous-feed shredder, wait until
the drive has come to a standstill and pull out the mains plug. Do not
reach into the feed tube.
A Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the cutting discs. Take hold
of cutting discs by the edge only. Do not touch blender blades with
bare hands.
A Risk of injury from sharp blades / rotating drive!
Never place fingers in the attached blender! Do not remove / attach
the blender until the drive is at a standstill! Operate the assembled
blender only and with the lid attached.
A Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.5 litres of hot or frothing liquid.
A Important!
Use the appliance with original accessories only. When using the
accessories, follow the enclosed operating instructions.
Use only one tool or accessory at any one time.
A Explanation of the symbols on the appliance or accessory
i
Follow the instructions in the operating instructions.
Y
Caution! Rotating blades.
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
For your safety
en
19