Descargar Imprimir esta página

Bosch MUM50149 Instrucciones De Uso página 24

Ocultar thumbs Ver también para MUM50149:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 119
en
Operation 
  ■ Carefully place the required slicing or 
shredding disc onto the tips of the disc 
holder (Fig. G-6a). 
In the case of reversible discs, ensure that 
the required side is face up.
  ■ Grip disc holder at the upper end and 
insert into the housing (Fig. G-6b).
  ■ Attach the cover (note mark) and turn all 
the way in a clockwise direction.
  ■ Place continuous-feed shredder on the 
drive and rotate all the way in a clockwise 
direction, as illustrated in Fig. G-8.
  ■ Turn rotary switch to recommended 
setting.
  ■ Put food to be processed in the feed tube 
and push down with the pusher.
Warning!
Prevent the cut ingredients from building up 
in the outlet opening.
Tip: To ensure even cutting results, process 
thin ingredients in bunches.
Note: If the food to be processed sticks in 
the continuous-feed shredder, switch food 
processor off, pull out mains plug, wait until 
the drive comes to a standstill, remove cover 
from the continuous-feed shredder and 
empty feed tube.
After using the appliance
  ■ Switch off the appliance with the rotary 
switch.
  ■ Rotate the continuous-feed shredder in an 
anti-clockwise direction and remove.
  ■ Rotate the lid in an anti-clockwise direction 
and remove.
  ■ Remove disc holder with disc. To do this, 
press finger from below against the drive 
shaft (Fig. H).
  ■ Clean parts.
Blender
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender! 
Do not remove / attach the blender until the 
drive is at a standstill! Operate the assem-
bled blender only and with the lid attached.
24 
W Risk of scalding!
If processing hot liquids, steam escapes 
through the funnel in the lid. Add a 
max. 0,5 litres of hot or frothing liquid.
Warning!
Blender may be damaged. Do not process 
deep-frozen ingredients (except ice cubes). 
Do not operate blender when empty.
Working with the blender
Fig. J:
  ■ Press the release button and 
move the swivel arm to position 4.
  ■ Remove the blender drive cover.
  ■ Attach blender jug (mark on the handle on 
mark on the base unit) and turn all the way 
in an anti-clockwise direction.
  ■ Add ingredients. 
Maximum amount of liquid = 1.25 litres; 
maximum amount of frothing or hot liquids 
= 0.5 litres; 
Optimal processing capacity –  
solids = 50-100 g;
  ■ Attach the cover and turn anti-clockwise all 
the way into the blender handle. The cover 
must be locked in position.
  ■ Set the rotary switch to the desired setting.
Adding more ingredients
Fig. J-8:
  ■ Switch off the appliance with the rotary 
switch.
  ■ Remove the lid and add ingredients
or
  ■ remove the funnel and gradually add solid 
ingredients through the refill opening
or
  ■ pour liquid ingredients through the funnel.
After using the appliance
  ■ Switch off the appliance with the rotary 
switch.
  ■ Rotate the blender in a clockwise direction 
and remove.
Tip: It is recommended to clean the blender 
immediately after use.

Publicidad

loading