Metra 99-8248B Instrucciones De Instalación página 3

ISO DIN radio provision with pocket
1. Attach the (2) panel clips to the
radio housing.
Note: The factory panel clips
may be used if preferred.
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8" Phillips screws
supplied. (Figure A)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
4. Locate the factory wiring
harness in the dash. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. All accessories, switches,
and especially air bag indicator
lights must be plugged in before
reconnecting the battery or cycling
the ignition. Test everything for
proper operation.
Kit Assembly
(Figure A)
99-8248B
5. Mount the radio/bracket assembly
into the dash opening.
6. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.
3
(Figure B)