Flex LB 17-11 125 Manual De Instrucciones página 21

LB 17-11 125 / LBE 17-11 125
Instructions for use
WARNING!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Before switching on the power tool
Unpack the angle grinder and check that
there are no missing or damaged parts.
Attach the guard
WARNING!
When using the angle grinder for roughing
or cutting, never work without the guard.
A special cutting guard must be used for
cutting.
Pull out the mains plug.

Attach the guard (1.). Lugs on the guard

hood must be located in the flange
recesses (2.).
Turn guard hood clockwise.

Rotation is possible in one direction only!
Remove in reverse order.

Attach the handle
NOTE
It is not permitted to operate the electric
power tool without the handle.
Attaching/changing the tool
Handle
Pull out the mains plug.

Remove the handle from the power tool

by rotating it in an anti-clockwise
direction.
Rotate the cover on the handle by 180°

until it engages.
The stop key is released.
21