Flex LB 17-11 125 Manual De Instrucciones página 15

LB 17-11 125 / LBE 17-11 125
Contents
Symbols used in this manual . . . . . . . . 15
Symbols on the power tool . . . . . . . . . . 15
For your safety . . . . . . . . . . . . . . . . . . . 15
Noise and vibration . . . . . . . . . . . . . . . . 18
Technical specifications . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Instructions for use . . . . . . . . . . . . . . . . 21
Maintenance and care . . . . . . . . . . . . . . 24
Disposal information . . . . . . . . . . . . . . . 24
-Declaration of Conformity . . . . . . . . 25
Exemption from liability . . . . . . . . . . . . . 25
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Protection class II
(completely insulated)
Disposal information for the old
machine (see page 24)!
Prevents kickback of the machine
if the tool becomes blocked.
Overload protection: switches the
machine off in the event of
overload.
A tachogenerator prevents the
speed from falling under load.
Better work safety and improved
handling thanks to gentle speed
development.
Prevents unintentional machine
start after a power failure.
The speed can be set variably
in 6 stages.
Brake system reduces run-on
period of tool.
Micro-processor electronics
For your safety
WARNING!
Before using the angle grinder, please read
and follow:
these operating instructions,
–
the "General safety instructions" on the
–
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
–
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
as intended,
–
in perfect working order.
–
Faults which impair safety must be repaired
immediately.
15