Descargar Imprimir esta página

BQS BEZ123 AB730 Manual De Uso página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

11. Check that the buckle is properly fastened. It is important that
in the event of an emergency the child can be released quickly.
12. Make sure the seat does not become caught by the vehicle´s
door or reclining seat. Likewise, check that the seat is properly
and sufficiently fitted.
13. Never try to remove, change or add pieces to the seat or
harness since their basic and security functions may be
seriously affected.
14. Always fasten this safety seat into the vehicle with the seat
belt, even when not in use. Never leave your child unattended
when seated or not.
15. Contact our Customer Service for any question about installing
this child safety seat: +34 943 833 013.
16. Please keep this safety seat away from corrosive products.
17.The manufacturer guarantees the quality of its products but not
the quality of second-hand products or those registered under
other trademarks.
18.The illustrations in this instructions booklet are for information
purposes only. The child restraint may have small differences from
the photographs or images in this instructions manual. These
variations do not affect its approval by ECE Regulation 44/04.
1. USE IN VEHICLES
3-point lap and
diagonal seat belt
2-point lap seat belt
Only suitable for this
particular seat WHEN having
a lap and diagonal seat belt
(3 anchor points)
Child restraint system
20
Correct installation /
proper
Incorrect installation /
improper
Optional installation
BEZ123
2. SEAT PARTS AND FITTINGS
A. Cover.
B. Diagonal belt hook.
C. Instructions manual pocket.
D. Harness pads.
E. Harness straps.
F. Buckle release-button.
G. Locking buckle.
H. Ergo seat cushion.
I. Group 1 diagonal belt hook.
J. Group 2 and 3 diagonal belt hook.
K. Harness adjustment button.
L. Harness adjuster strap.
M. Headrest adjuster lever.
N. Height adjuster lever.
O. Harness strap slot.
P. Harness pad connector.
Q. Harness straps.
R. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 1.
Only suitable for Group 1, approx. 9
WARNING
months to 4 years of age (9-18 Kg.)
1. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (3.1).
2. Pull the vehicle´s diagonal seat belt behind the backrest, then the
lap seat belt through the
I
hooks in the armrest (3.2, 3.3, 3.4 and
3.5).
3. Fasten the seat belt into the vehicle´s buckle until it "clicks",
making sure the child seat is properly installed (3.6).
Make sure that the seat belt is completely tightened.
Group 1/2/3
EN
www.babyqs.com
21

Publicidad

loading