Publicidad
Idiomas disponibles
Idiomas disponibles
Technical data
Description
Net Weight
Motor Displacement
Maximum Motor Performance
Cutter Head
Cutting Width
Nylon line diameter
Work Cycle
Fuel specifications
• The string trimmer has an air-cooled 2-cycle motor using a mix of unleaded gasoline and high quality self-propul-
sion oil with fuel stabilizer specified for air-cooled two-cycle motors.
• The motor is certified to run with unleaded gasoline for vehicles with 87 or more ([R+M]) octane level.
• Do not use any type of gasoline premixed with oil bought in service stations such as gasoline for motorcycles.
• Do not use automotive oil or oil for 2-cycle outboard motors oil.
• The mix ratio should be 40 parts gasoline per 1 part oil (40:1 ratio). Prepare the mix in a gasoline-approved
container. Always mix thoroughly before pouring in the motor tank.
Do not use fuel mix stored longer than 7 days. Make small amounts of mix.
CAUTION
Never smoke near fuel, the gasoline filling up area or where the oil mix is being prepared or when
WARNING
operating the tool.
Any attempt to start the string trimmer with no oil added to the fuel mix will damage to the string
WARNING
trimmer.
1
L
1 liter
Gasoline
To prolong the useful life of the motor use
Code
Fuel Tank
Speed
Handle
Use the or ACT- 2T
mix 5 capfuls oil per each liter gasoline.
A wrong mix may cause the motor to throw a rod causing
expensive repairs!
+
5 capfuls oil
DES-26C
12496
Gas string trimmer, curved shaft
11.4 lb (with no fuel)
500 cc
26 cc
1 Hp
8 000 RPM
Nylon line
17"
0.08 in to 0.1 in
Loop handle
30 minutes idle per fuel tank consumed.
Maximum 6 hours daily.
OIL** cap as measure,
=
two-cycle synthetic motor oil.
* 1 gallon = 3,78 liter
ratio
40:1
Mix
** Not included
ENGLISH
3
Publicidad
