Table of Contents
1 Online user manual
on page 3
2 Specifications
on page 3
3 General information
on page 4
4 Installation
on page 6
5 User interface and navigation
6 Startup
on page 10
Section 1 Online user manual
This Basic User Manual contains less information than the User Manual, which is available on the
manufacturer's website.
Section 2 Specifications
Specifications are subject to change without notice.
Specification
Dimensions (W x D x H)
Enclosure rating
Weight
Power requirements (internal)
Power requirements (external)
Operating temperature (discharging)
Charging temperature
Storage temperature
Interface
5-pin input connector
External power supply connection
Chemkey slots
Data memory
Data storage
Temperature correction (for IntelliCal
probes)
Measurement display lock (for IntelliCal
probes)
Protection class
Certifications
Warranty
on page 8
Details
13.08 x 5.89 x 25.83 cm (5.15 x 2.32 x 10.17 in.)
IP64 with caps installed for the meter probe connector ports or with
the probes connected to the instrument
1.2 kg (2.7 lb)
Lithium ion rechargeable battery, 7.4V, 5.0Ah (5000mAh)
100V–240 VAC, 50/60Hz input, 12V at 3A output
5 to 50 °C (41 to 122 °F), maximum 85% relative humidity (non-
condensing)
5 to 45 °C (41 to 113 °F), maximum 85% relative humidity (non-
condensing)
–20 to 60 °C (–4 to 140 °F), maximum 85% relative humidity (non-
condensing)
Mini USB port
Two M12 connectors for IntelliCal probes
2.5 mm Jack
4
1000 measured values (result, date, time, site ID, user ID)
Automatic in Press to Read measurement mode. Manual in
Continuous measurement mode
™
Off, automatic and manual (parameter dependent)
™
Press to Read and Continuous measurement mode
III
CE, UKCA, FCC, ISED, RCM, KC
1 year
7 Standard operation
on page 11
8 Calibration
on page 15
9 Data log
on page 16
10 Maintenance
on page 17
11 Troubleshooting
on page 20
12 Replacement parts and accessories
on page 22
English 3