CAUTION:
•
Avoid working over pieces of rope, wire, cables: these can be caught in the
brush and create friction.
•
•
Polishing operations should only be carried out in areas where the passage
of unauthorised persons is prohibited. Signal the presence of work areas with
suitable signs.
•
Attention: do not let the power cable come into contact with the rotating brush.
•
The machine does not cause harmful vibrations.
•
Do not place any liquid containers on the machine.
•
•
Avoid the brush or the pad holder works with the machine at standstill, so as not
•
The machine must be kept only in enclosed areas.
•
Always use the machine in compliance with its intended use, taking into
consideration local conditions and looking out for the presence of others when
working, especially children.
•
Never leave the appliance unattended until it has been switched off and the
plug has been taken out of the mains socket.
•
To prevent unauthorised use of the machine, the power supply should be cut
off, switch off the machine and pull out the power cable from the socket.
•
If the machine is left unattended, it must be protected from any accidental
movements.
DANGER:
•
Before cleaning and carrying out maintenance on the machine and before
replacing any components, switch off the machine and pull out the power
plug from the mains socket.
•
Repairs should only be carried out by authorised service centres or by
current safety norms.
•
Observe the safety check as per local provisions for commercial appliances.
•
Always wear suitable protective gloves when working with the machine.
MAINTENANCE
25
25