Saeco GranAroma SM6585 Manual Del Usuario página 9

Brewing coffee with beans
1 To brew a coffee, tap the drink icon of your choice (Fig. 2) or tap the 'More Drinks' icon (Fig. 3).
- You can now adjust the drink to your personal taste (Fig. 4). Use the up and down arrows (Fig. 5)
to adjust the coffee strength. Tap the OK icon if you want to adjust more settings (Fig. 6).
2 Press the start/stop
3 To stop dispensing coffee before the machine is finished, press the start/stop
To brew 2 coffees at the same time, tap the drink icon twice or select the 2x icon scrolling the
dedicated bar.
Do not use caramelized or flavored coffee beans.
Brewing milk-based drinks
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 Unscrew the lid of the milk container and fill the milk container with milk (Fig. 7). Then place the
metal milk tube in the container.
Always use milk coming directly from the fridge for optimal results.
3 Connect the flexible milk tube to the cappuccinatore (Fig. 8).
4 Tap the milk-based drink icon of your choice (Fig. 9) or tap the 'More Drinks' icon to select a
different drink (Fig. 3).
- You can now adjust the drink to your own preference (Fig. 10).
5 Press the start/stop
- For specific drinks, the machine first dispenses milk and then coffee. For a number of other
drinks this is the other way around, the machine will first dispense coffee and then milk.
- To stop dispensing milk before the machine has dispensed the preset amount, press the
start/stop button.
6 To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and
hold the start/stop
7 Directly after dispensing the milk, the 'HygieSteam Shot' is performed. The machine forces steam
through the internal milk system to rinse it quickly.
Brewing coffee with pre-ground coffee
1 Tilt the lid and pour one measuring scoop of pre-ground coffee into the pre-ground coffee
compartment (Fig. 11).
2 After selecting a drink, use the up and down arrows to select pre-ground coffee (Fig. 12). Then press
the start/stop button.
Note: If you select pre-ground coffee, you cannot adjust the coffee strength and/or brew more than
one drink at the same time.
Dispensing hot water
1 Make sure that the internal cappuccinatore is properly attached to the machine (Fig. 13).
2 Place a cup under the spout
3 Tap the 'More drinks' icon (Fig. 3) and scroll down to select 'Hot Water'.
4 Use the up and down arrows to adjust the hot water quantity or temperature to your preference
(Fig. 14).
5 Press the start/stop
button at any time to start brewing the selected drink.
button.
button.
button.
English
9
button again.