Getting Started; Installing Batteries In The Remote Control; Operating Range - Yamaha DRX-730 Manual De Instrucciones

Chapter 2: Getting Started
This chapter explains how to install the batteries in
the remote control and how to connect speakers and
other components to the DRX-730.
Installing batteries in the
remote control
1
Push the tab on the battery compartment
cover in the direction of the arrow and remove
the cover.
Push here
2
Insert the supplied batteries into the battery
compartment with the correct polarity
(+ and –).
3
Replace the battery compartment cover.
8
En
Notes:
• If the operating range of the remote control
decreases, replace all of the batteries with new
ones.
• Do not use old and new batteries together.
• Do not use different types of batteries together,
such as alkaline and manganese. Although they
may look similar, each type has its own
characteristics.
• When the batteries run out, remove them from
the remote control immediately to prevent an
explosion or acid leak.
• Always follow the battery disposal regulations for
your area.
• If a battery starts leaking, dispose of it
immediately. Be careful not to let leaking battery
acid come into contact with your skin or clothing.
Before inserting new batteries, wipe the battery
compartment clean.

Operating range

The remote control has an operating range of up to 6
meters (20 feet). When using the remote control,
point it toward the DRX-730's remote control sensor,
which is next to the display, see below.
Notes:
• Be careful not to spill liquid on the remote
control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following
places: hot or humid places, such as near a heater
or in a bathroom; extremely cold places; dusty
places.
TIMER
HDMI
PROGRESSIVE
STANDBY/ON
USB PORTABLE PHONES
30
VOLUME
INPUT
Up to 6 m
(20 feet)
30