Fitting The Carrying Eye; Mounting The Cutting Tools - Stihl FS 100 RX Manual De Instrucciones

English / USA
2
: Press down the trigger interlock (1)
and squeeze the throttle trigger (2)
(full throttle) – this sets the throttle
cable correctly.
14

Fitting the Carrying Eye*

1
: For position of carrying eye see
"Parts and Controls"
: Place the clamp (1) with the
tapped hole on the left-hand side
of the drive tube.
: Squeeze the two ends of the clamp
together and hold in that position.
: Insert M 6 x 14 screw (2).
: Line up the carrying eye.
: Tighten down the screw firmly.
* see "Guide to Using this Manual"
1
1
2

Mounting the Cutting Tools

Mowing tools
1 STIHL Supercut 20-2
2 STIHL Autocut 25-2
3 STIHL Trimcut 30-2
!
Warning!
STIHL brushcutters with a loop handle
without barrier bar may be used only
with the above mentioned mowing head
with nylon line or plastic blades.
FS 100 RX