Publicidad
support@nextlevelracing.com
07
Align the Shifter Support Connecting Plate with the T-Nuts previously installed in Step 03.
Bolt through and secure with 2 x M8 Bolts and Washers.
(
INSIDE FACE
08
Install 4 x Full Width T-Nuts into the Shifter Arm Support.
Red dots show T-Nuts placement.
09
Align the T-Nuts installed to the inside face of the Shifter Arm Support in Step 08 with the mounting
slot on the Shifter Support Connecting Plate. Bolt through and secure with 2 x M8 Bolts and Washers.
PARTS:
• • Shifter Support Connecting
Plate
• • 2 x M8 20mm Bolts
• • 2 x M8 Washers
PARTS:
• • 4 x M8 Full Width T-Nuts
• • Shifter Arm Support
)
(
)
OUTSIDE FACE
PARTS:
• • 2 x M8 20mm Bolts
• • 2 x M8 Washers
8
8
(
)
TOP FACE
(
)
OUTSIDE FACE
(
)
INSIDE FACE
(
)
BOTTOM FACE
10
Install 10 x Full Width T-Nuts into the Shifter Arm. Red dots show T-Nuts placement.
B)
A)
11
A) Install 2 x Corner Brackets on the top and bottom of the Shifter Arm. Bolt through and secure with 4 x M8 Bolts and Washer
B) Install Shifter Arm Support Bracket (Right) to the bottom of the Shifter Arm. Bolt through and secure with 2 x M8 Bolts and Washer.
12
Align the Shifter Arm Assembly from Step 11 with the T-Nuts previously installed in Steps 06 and 08.
Bolt through and secure with 6 x M8 Bolts and Washers.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 10 x M8 Full Width T-Nuts
• • Shifter Arm
PARTS:
• • 2 x Corner Brackets
• • Shifter Arm
• • Shifter Arm Support
Bracket (Right)
• • 6 x M8 16mm
• • 6 x M8 Washers
Bolts
PARTS:
• • 6 x M8 16mm Bolts
• • 6 x M8 Washers
9
9
Publicidad
