Using Set Menu - Yamaha RX-V863 Guia De Inicio Rapido

Customizing this unit (MANUAL SETUP)

Using SET MENU

Use the remote control to access and adjust each
parameter.
y
• You can change the "SET MENU" parameters while this unit is
reproducing sound.
• If you press R PARAMETER during the "SET MENU"
operation, the "SET MENU" operation is canceled.
• Press 0 RETURN to return to the previous menu level.
Set the operation mode selector to F AMP
1
and then press H SET MENU to enter "SET
MENU".
The top "SET MENU" display appears in the OSD.
2
Press 9 k / n to select "MANUAL SETUP".
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
;SIGNAL INFO
[ ]/[ ]:
[ENTER]:
Press 9 ENTER to enter "MANUAL SETUP".
3
The "MANUAL SETUP" display appears in the
OSD.
MANUAL SETUP
. 1 BASIC MENU
2 VOLUME MENU
3 SOUND MENU
4 INPUT MENU
5 OPTION MENU
[ ]/[ ]:
[ENTER]:
76
En
Up/Down
Enter
Up/Down
Enter
4
Press 9 k / n repeatedly and then press
9 ENTER to select and enter the desired
menu.
The following displays are examples where "SOUND
MENU" is selected.
3 SOUND MENU
.
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)EXTD SUR.
[ ]/[ ]:
[ENTER]:
5
Press 9 k / n repeatedly and then press
9 ENTER to select and enter the desired
submenu.
The following display is an example where "LFE
LEVEL" is selected.
B)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
[ ]/[ ]:
[p]/[[]:
6
Press 9 k / n to select the desired parameter
and then 9 l / h to change the parameter
settings.
• Press 9 h to increase the value.
• Press 9 l to decrease the value.
Press H SET MENU to exit from "SET
7
MENU".
Up/Down
Enter
Up/Down
Adjust