Altering The Stitch Length; Altering The Needle Drop Position - Janome 3022 Manual De Instrucciones

1.0 2.2
0.0 3.5

Altering the stitch length

The stitch length can be altered between 0.0 and 5.0.
Press the mode key
adjustment (the bottom green light lights up).
The preset value 2.2 will be indicated.
Press the plus (+) key to increase the stitch length.
Press the minus (–) key to decrease the stitch length.
* The reverse stitch length cannot be set longer than
2.5.
5.0

Altering the needle drop position

The needle drop position of the following stitches can
be altered:
Press the mode key
adjustment (the middle green light lights up).
The preset value "3.5" will be indicated.
Press the plus (+) key to move the needle drop to the
right.
Press the minus (–) key to move the needle drop to
the left.
7.0
30
to activate stitch length
to activate stitch width