WERTAIR Mamba Pro Manual De Instrucciones página 16

GB
The products covered by this manual are listed on page 53.
These products are intended for generating compressed air from the atmospheric air to
be used by other devices.
They are basically composed by:
-one or two oilfree compressor units powered by electrical motors,
-a receiver for the compressed air stocking ,
-a safety valve, preventing any overpressure,
-a pressure switch for the automatic control of the compressor units.
These products bear the CE mark and comply with the essential safety requirements of
European Directive 2006/42/EC.
Failure to comply with the Safety instructions listed in section 1.3 of this
manual is considered an improper use and may be a source of danger.
The packed compressors have to be kept in a dry, covered and sheltered place at a
temperature between -10°C and +50°C and relative humidity between 10% and 90%.
with no condensation.
The compressors have to be handled and positioned with care using, if necessary,
fork-lift trucks or transpallets.
The stacking of packages is not allowed.
In case of damaged package, do not switch the compressor on. Refer to
your dealer for the compressor check.
Always use the original package for transporting the compressor in order to prevent any
handling damage.
The packing material has to be disposed in compliance with the regulations in force in
the country, where the compressor has been installed, or recycled or reused.
15
2
2.1 - PRODUCT DESCRIPTION AND INTENDED USE
2.3 - STORAGE AND TRANSPORTATION
2.4 - PACKING DISPOSAL
OPERATION
2.2 - IMPROPER USE