DKN technology DUNLOP 4-EM Manual Del Usuario página 22

Watt:
Displays power value function by pressing the
ENTER button (marking – flashes in "WATT" lcd
window.)
Pulse:
Hold firmly both sensors on the handgrip (please
wipe sensors and hands before starting measuring
your pulse) or apply optional cheststrap (moisten
slightly the contacts of the strap). Your current heart
rate will be displayed within 30 seconds up to one
minute. A stable figure requires to hold both sensors
firmly.
Your computer is compatible with the optional
chest transmitter (ref 20073), for integrated
wireless heart rate registration. For any
questions please do contact your DKN-
dealer, or visit our website
Technology
.com, or ask for more information:
Technology
info@ds-design.be
Function value range
Functions Display Range
Speed 0.0 - 99.9 km/h
RPM 20 - 999 rpm
Time 00.00 - 99.59 min 01.00 - 99.00 min
Distance 0.00 - 99.99 km
Watt 0 - 999 watts
Calories 0 - 9999 cal
Pulse 30 - 240 bpm
Recovery F1 - F6
www.DKN-
Preset Range
None
None
0.5 - 99.50 km
0 - 350 watts
0 - 9999 cal
30 - 240 bpm
None
Training in MANUAL mode
•
Select "MANUAL", use "UP"and"DOWN" button
to adjust the load level (this ergometer offers 16
levels), confirm selection by pressing "ENTER".
•
"TIME" flashes: use "UP"and"DOWN" button to
set exercise time, confirm selection by pressing
"ENTER". If you donot intend setting exercise
time, simply press "ENTER".
•
"DISTANCE" flashes: use "UP"and"DOWN"
button to set distance, confirm selection by
pressing "ENTER". If you donot intend setting
exercise distance, simply press "ENTER".
•
"CALORIES" flashes: use "UP"and"DOWN"
button to set calorie consumption, confirm
selection by pressing "ENTER". If you donot
intend setting calorie consumption, simply press
"ENTER".
•
"PULSE" flashes: use "UP"and"DOWN" button to
set maximum heart rate, confirm selection by
pressing "MODE". If you donot intend setting a
heart rate level, simply press "ENTER", the
monitor will display current heart rate value.
•
Start exercising by pressing the "ST/STOP"
button.