TRAPP TR-600 Manual De Instrucciones página 34

3 - Personal safety
Most accidents occur while the operator is

using the machine or during maintenance,
and are caused by lack of attention with basic
safety precautions. It is, therefore, important
to be aware of the potential risks of an action,
paying attention to their effects.
Take precautions against accidental running.

Make sure the switch is set to "off" before
plugging the equipment in. Failure to do so
may cause a major accident.
Never leave the motor running indoors or

without ventilation. Exhaust gas contains
carbon monoxide, an odorless and deadly
gas.
Beware with what is going on and use

common sense
equipment. Do not use it when you are tired,
distracted or under the influence of drugs,
alcohol or medicine. A slight distraction may
result in a severe injury.
Wear protection equipment. Always wear

goggles. Wearing protection equipment like
gloves, shoes, and ear plugs increases your
protection and reduces the risk of an accident.
Wear proper clothes. Wear neither loose

clothes nor jewelry as they can accidentally
get caught by the movable parts. If you have
long hair, tie it safely.
Remove all objects before turning on the

equipment. A tool or any other object stuck
in the movable parts of the equipment may
result in an injury.
4 - Use and care
Do not use the equipment if the switch does

not turn on/off. The equipment can not be
controlled if the on/off switch is damaged.
A defective switch shall be immediately
repaired.
Switch off the circuit breaker, remove

the fuses or unplug the equipment before
servicing, replacing the cutting blades and
accessories. These safety preventive measures
reduce the risk of accidental operation of the
equipment.
34
when operating the
Do not overuse the equipment. Use it in the

right way and for the purposes described in
this manual for better performance and safety
while working.
Do not allow people that are not familiarized

with the equipment to use it. The equipment
may become dangerous in the hands of
people not familiar with its operation.
Preserve your equipment. Frequently check

if the movable parts are secured, if any
component is damaged or check for any
other condition that may affect optimum
operation. Shall any problem arise, fix it
before using the equipment. Many accidents
are caused by lack of proper maintenance.
Keep the cutting blade sharp and clean.

Use the equipment and accessories according

to the instructions in this manual. Take in
consideration the working conditions and
the service to be done. Using the equipment
for operations other than those in this manual
may result in dangerous situations and risk of
accident.
Do not shred stones, glass, metals, plastic,

packages of chemical products (perfumes,
cleaning products, paint, etc.) or other
materials that may damage the shredder.
Never store the equipment with fuel in

the tank. And if necessary keep the motor
operating until shutdown due to lack of fuel.
Attention!
The cutting blade keeps moving after the
equipment is switched off. Be aware of that when
servicing.
www.trapp.com.br