TRAPP TR-600 Manual De Instrucciones página 39

www.trapp.com.br
TR-600RM
D
D
Image for illustrative purposes only
A
B
C
D
Power
Estimated weight
Maximum cutting diameter
Funnel dimension
Feeding system
Feeding opening
Number of blades
Disk rotation
Blade peripheral speed
Disk diameter
Three connection points
TDP rpm
Production
Note: 1) The machines ship from factory without the (On/Off) switch and electric motor connections; wiring to the
desired voltage as available in the region is at the customer's discretion. The electric motor connection diagram
is available on the electric motor itself, so that the customer can make the connection.
Note: TRAPP does not provide warranty in case of motor burnout due to inverted or wrong connection, as described in the
manual.
B
B
TR-600 TR-600E
1,200 mm (47")
- 15 cv
255 kg 330 kg
A
A
TR-600G
1)
790 mm (31")
1,055 mm (41")
1,440 mm (57")
2,070 mm (81")
16 HP a 17 HP
300 kg
100 mm (4")
700 x 700 mm (27" x 27")
Manual-gravity
146 x 210 mm (5.3/4" x 8.1/4")
2
1,600 rpm
42.3 m/s (8,326 fpm)
505 mm (20")
Category I
540 rpm
3 m /h
3
C
C
TR-600T TR-600RM
2,397 mm
1,341 mm
1,528 mm
2,745 mm
20 HP 16 HP
275 kg 425 kg
39