LAVAZZA WEGA EP 4100 BM Manual De Uso Y Mantenimiento página 71

8. PROGRAMMING
Programming must be performed by technical staff.
8.1 PROGRAMMING COFFEE SERVINGS - LEFT-HAND UNIT
hold down the manual dispensing key (8)
(the LEDs of the left-hand unit to be programmed will come on);
insert a pod in the filter holder and attach it to the left-hand unit, tightening
firmly;
place the coffee cup under the dispensing spout;
press the desired serving key (6)
being programmed will come on);
when the desired serving is reached, confirm by pressing the key (6)
again (the LED of the programmed serving will remain off, while the LEDs
of the keys yet to be programmed will remain lit);
repeat this operation for the other servings keys.
8.2 PROGRAMMING COFFEE SERVINGS - RIGHT-HAND UNIT
hold down the manual dispensing key (3)
(the LEDs of the right-hand unit to be programmed will come on);
insert a pod in the filter holder and attach it to the right-hand unit, tighten-
ing firmly;
place the coffee cup under the dispensing spout;
press the desired serving key (1)
programmed will come on);
when the desired serving is reached, confirm by pressing the key (1)
again (the LED of the programmed serving will remain off, while the LEDs
of the keys yet to be programmed will remain lit);
repeat this operation for the other servings keys.
RIGHT-HAND
UNIT
10
The programming of each serving must be done ith a ne pod and not ith previousl used pods.
To exit the programming mode ust ait
button panel.
espresso coffee machine - user instructions
(the LED of the serving being
6
7
8
9
for at least 5 seconds
(the LED of the serving
for at least 5 seconds
1 1,5
0,5 2
2,5
0
bar
seconds ithout performing an operations on the push
E S P R E S S O P O I N T
1
2
RIGHT-HAND
3
UNIT
4
5
english
71