Publicidad
Idiomas disponibles
Idiomas disponibles
15. MALFUNCTIONS and CORRESPONDING SOLUTIONS
Indication
1) The machine switch is in the "0" position.
THE MAINS
2) The mains power supply switch is in the OFF
INDICATOR LIGHT
DOES NOT COME ON
3) The power cord is unplugged.
NO WATER IN BOILER
There is no water in the internal tank.
1) The nozzle sprayer is clogged.
STEAM DOES NOT COME
OUT OF NOZZLES
2) The machine switch is in the "0" position.
1) There is no water in the internal tank.
NO DISPENSING
2) There are air bubbles in the hydraulic circuit
WATER LEAKS FROM
The drainage tray is full.
THE MACHINE
COFFEE
1) Residual air inside the boiler.
TOO HOT or
2) Technical problem.
TOO COLD
THE PRESSURE GAUGE
INDICATES A PRES-
SURE BELOW 0.8 BAR
or ABOVE 1.2 BAR
COFFEE GROUNDS
IN CUP
1) The pod holder is dirty.
2) The lower/upper perforator is worn.
DISPENSING IS
DIFFICULT
f the problem cannot be resolved turn the machine off and call for Technical ssistance.
o not attempt an sort of repair.
espresso coffee machine - user instructions
Cause
position.
Residual air inside the boiler.
Solution
1) Turn the machine switch to the "1" position.
2) Place the mains switch in the ON position.
3) Plug the power cord in.
Fill the tank with water.
1) Clean the steam nozzle sprayer.
2) Turn the machine switch to the "1" position.
1) Fill the tank with potable water.
2) Perform the bleeding manoeuvre as indicated
in paragraph 4.5 .
Empty the drainage tray.
Dispense steam for a few seconds. Should the
problem persist, call for Technical Assistance.
Dispense steam for a few seconds to obtain a
pressure of 0,8 - 1,2 BAR.
1) Clean the pod holder as indicated in chap. 10.
2) Replace the lower perforator or call for Technical
Assistance.
E S P R E S S O
P O I N T
english
77
Publicidad
