Publicidad
Idiomas disponibles
Idiomas disponibles
changing the channel etc. "BP" appears on the display when the function
is active.
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the
menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
to
activate
( on) /
deactivate
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
exits
If no key is pressed, the unit
from the display.
Default KEY BEEP is On.
5) ROGER BEEP
When the function is active, the icon
The Roger Beep
sounds
when the PTT switch (12) on the microphone is re-
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Long Press PUSH key (4) to
enter
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the ROGER BEEP menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
( 1 to 6*) /
to
activate
deactivate
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
exits
If no key is pressed, the unit
from the display.
*6 roger tones for ROGER BEEP.
Default ROGER BEEP is OF.
6) INDIC
Use this function to select the information to be displayed.
the MENU.
is displayed.
The current value blinks on the display.
( of) the function.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
appears on the display.
the MENU.
is displayed.
The current value blinks on the display.
(OF) the function.
validate
and
exit
the MENU.
MENU after 10 seconds.
disappears
In RX mode:
Frequency and voltage are displayed continuously.
In TX mode:
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the INDIC menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone to
select
the function to be displayed. FREQUENCY ~ SWR ~ TOT is displayed
alternately. Each time the PTT is pressed, the display indicates the voltage
and function selected..
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press the PTT key (18) to
disappears from the display.
5.
If no key is pressed, the unit
from the display.
7) SCAN MODE
Allows to
select
the MODE of SCAN.
Long Press PUSH key (4) to
1.
Turn the CH rotary knob (4) or use UP/DN keys (19) on the microphone to
select
the SCAN MODE menu.
2.
Press PUSH key (4) to
validate.
3.
Turn the CH rotary knob (4) or use the UP/DN keys (19) on the microphone
select
to
the mode CH or NE.
4.
Short press PUSH key (4) to validate. a) Return to the point 1 to set another
menu or b) Short press PTT key (18) to
pears from the display.
5.
If no key is pressed, the unit
from the display.
"CH" means that the station scans all 40 channels of the active frequency
band.
"nE" means that the station scans memorized and priority channels only.
Default mode is: CH.
8) SCAN TYPE
Allows to
select
the TYPE of SCAN.
52
enter
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
exits
MENU after 10 seconds.
enter
the MENU.
is displayed.
The current value blinks on the display.
validate
and
exit
the MENU.
exits
MENU after 10 seconds.
the MENU.
disappears
disap-
disappears
Publicidad
