Publicidad
Idiomas disponibles
Idiomas disponibles
Caring for and cleaning your appliance
Anomalies and solutions
ANOMALIES AND SOLUTIONS
The oven is not heating.
Check that the oven is correctly connected and
that your installation's fuse is not out of service.
Increase the selected temperature.
The oven light is not working.
Replace the bulb or the fuse. Check that the oven
is correctly connected.
The cooling fan continues to operate after
the oven stops.
This is normal; the fan may continue running until
a maximum of 1 hour after cooking to lower the
temperature inside and outside the oven. If the
fan runs for over an hour, contact the After Sales
Department.
The pyrolysis cleaning cycle does not begin.
Check that the door is locked. There may be a
door locking or temperature sensor fault. If the
fault persists, contact the Customer Service De-
partment.
The
symbol flashes in the display.
Door locking fault; contact the Customer Services
Department.
Cooking in a bain-marie.
Please use ventilated cooking methods when cook-
ing in a bain-marie.
Vibration noise.
Make sure the power cord is not in contact with
the rear surface of the oven.
This will not have any impact on your appliance's
operation, however it may cause a vibration noise
when the fan is running. Remove your appliance
and move the cord away. Reposition your oven.
19
Publicidad
