JVC RX-DV31SL Manual De Instrucciones página 69

1
If you have already plugged your VCR, TV, and this unit
into the AC outlets, unplug their AC power cords first.
2
Connect your VCR, TV, and this unit following
"CONNECTIONS 1" on the previous page, using cables
with monaural mini-plugs (not supplied).
3
Connect the audio input/output jacks on VCR, TV, and this
unit using the audio cords.
• See pages 9 and 10.
4
Connect the video input/output jacks on VCR, TV and this
unit following "CONNECTIONS 2" on the previous page,
using the composite video cord, with S-video plug or with
component video plugs.
5
Plug the AC power cords of the components into the AC
outlets.
6
When turning on the TV for the first time after the AV
COMPU LINK connection, turn the TV volume to the
minimum using the TV volume control on the TV.
7
Turn on other connected components first, then turn on
this unit.
• When turning on the VCR, use the remote control
supplied with this unit—press VCR
The AV COMPU LINK remote control system allows you to
use the five basic functions listed below.
Remote control of the TV and VCR using this
remote control
For details, see page 66.
• Aim the remote control directly at the remote sensor on
each target component.
One-touch video play
Simply by inserting a video cassette without its safety tab into
the VCR, you can enjoy the video playback without setting
other switches manually. The unit automatically turns on and
changes the source to VCR.
The TV automatically turns on and changes the input mode to
the appropriate position so that you can view the playback
picture.
When you insert a video cassette with its safety tab, press the
play (3) button on the VCR or on the remote control. You can
get the same result.
One-touch DVD play
Simply by starting playback on the built-in DVD player, you
can enjoy the playback without setting other switches
manually.
The TV automatically turns on and changes the input mode to
the appropriate position so that you can view the playback
picture.
Automatic selection of TV's input mode
• When you select TV as the source to play on the unit, the
TV automatically changes the input mode to the TV tuner so
that you can watch TV.
• When you select DVD, VCR, or DBS as the source to play
on the unit, the TV automatically changes the input mode to
the appropriate position so that you can view the playback
picture.
Notes:
• When connecting a TV with the AV COMPU LINK EX terminal to
this unit, you cannot use a component video cable (as CASE 3 on
the previous page).
• When you select TV as the source on the unit, you cannot see the
.
menu on the TV screen since the AV COMPU LINK remote control
system automatically changes the TV's input mode to the TV tuner.
If you do not mind stopping listening to the TV sounds, you can
then show the on-screen menu after changing the TV's input mode
to the appropriate position the unit is connected to.
Automatic power on/off
The TV and VCR turn on and off along with the unit.
When you turn on the unit;
• If the previously selected source is VCR, the TV and VCR
will turn on automatically.
• If the previously selected source is TV or DVD, only the TV
will turn on automatically.
When you turn off the unit, the TV and VCR will turn off.
Note:
• If you turn off the unit while recording on the VCR, the VCR will not
turn off, but continue recording.
64