Descargar Imprimir esta página

Singer 85SCH Manual De Instrucciones página 20

Publicidad

EN
Winding the Bobbin
- Place thread and corresponding spool holder on to spool
pin. (1/2)
- Snap thread into thread guide. (3)
- Wind thread clockwise around bobbin winder tension discs. (4)
- Thread bobbin as illustrated and place on spindle. (5)
- Push bobbin spindle to right. (6)
- Hold thread end securily. (7)
- Step on foot control pedal. (8)
- Trim thread close to the bobbin & then continue winding
until bobbin is full. (9)
- Cut thread, push bobbin spindle to left (10) and remove.
Please Note:
When the bobbin winder spindle is in "bobbin winding"
position, the machine will not sew and the
To start sewing, push the bobbin winder spindle to the left
(sewing position).
1
2
handwheel turn
.
4
7
12
3
5
8
9
6
10

Publicidad

loading