DCU Tecnologic Senior Manual De Instrucciones página 28

ENG
(2) On the map, you can see the type of positioning in
different colors, WIFI positioning is orange, GPS positioning
is blue, LBS positioning is purple
(3) In the 10 minutes or 1-hour movement tracking mode, the
Smartwatch will regularly update the location on the APP
Map page and History
(4) The device supports GPS tracking (Outdoor), WIFI tracking
(Outdoor and indoor), LBS tracking (Outdoor and indoor).
The primary difference between GPS and Wi-Fi locating
technologies are methods of gathering location data. GPS
uses satellites that orbit around the Earth to triangulate a
user's location, whereas Wi-Fi locating technology uses
relative network signal strength gathered at network access
points. GPS tracking is available in out-door but mostly not
available for indoor. When the Smartwatch doesn't find GPS
signal, it will use Wi-Fi or LBS tracking, Wi-Fi tracking is
better for indoor comparing with LBS tracking.
2. Historical Location Playback and Geo-fence (safe zone)
In the main page of the APP, click "History" button at the
bottom, you can check the location history playback within
the last three months.
This feature defines a Geo-fence (safe zone) perimeter and
sends the user a push notification if the tracker has left or
entered the safe zone.
The user can still manually locate the tracker when the safe
zone is turned on/off.
Click 'More' -> 'Geo-fence' -> click the "+" icon in the bottom
-> input the zone name -> Click and drag the map to set the
center point -> Click on the "+" "-" icon or slide Horizontal line
to Change the range of the circle radius of the Geo-fence ->
Click the "save" button at the bottom.
Note:
(1) App will show leave geofence alarm information (History
alarm information can be viewed in APP Information Centre,
which is in the upper left corner of the map interface).
(2) The APP may not notify user immediately of a geofence
28