ENG
Sleep Mode: Location will not automatically update. The user
will need to request a location with the "Locate" button
manually. In this mode, Geo-fence (safe zone) will not work.
This mode is the best way to save battery.
To locate Watch, tap on the 'locate' button, and the
Smartwatch will update its position as soon as possible.
10) APN Settings
CONFIGURATION NECESSARY ONLY IF THE SIM CARD COMPANY
DOES NOT ALLOW AUTOMATIC CONFIGURATION
The APN is what will allow the Smartwatch to connect to your
SIMs mobile service data network. The Smartwatch needs this
data to connect to your App. If the APN is not set, the
Smartwatch can still call, receive calls, send and receive SMS,
but the APP will show the device's status as "Offline".
Ask your carrier about APN information, and set it in the
Smartwatch. Or you can check your SIM card APN information
by installing SIM card in a mobile phone, check APN in the
network profile page in Settings of mobile phone.
setup APN by SMS Command:
pw,123456,apn,apnname,username,password,MCCMNC#.
For example: If the BSNL SIM card, the APN name is bsnlnet,
user name null, password null, MCC=404, MNC=80 then you
can send this SMS to Smartwatch: pw,123456,apn,bsnl-
net,,,40480#
Use your mobile phone; send the above SMS command to the
Smartwatch SIM card. After you send the SMS command, please
check if you get a setup success replied SMS from Smartwatch.
If you need to make a call, it is recommended not to use M2M
SIM card. Please also make sure that the SIM card data package
is available and has not expired. (Note: If the user name and
password is null, you still need to keep the comma symbol as
above) APN will set successfully after you get the reply SMS
from the GPS locator; you are suggested to reboot Smartwatch
after APN Settings. Note: Each operator's APN information is
different; please check the operator website for their APN and
MCC, MNC information. You can insert the sim card into your
Android phone, and find APN from the network profile.
34