Publicidad
Idiomas disponibles
Idiomas disponibles
English
Schedule Cleaning
With the EufyHome app, you can schedule RoboVac to start cleaning at a particular time.
• You can set the time and customize the cleaning schedules from Sunday to
Saturday on the EufyHome app. This function is only available on the app.
Start / Stop Cleaning
• You can also start or stop cleaning via the EufyHome app.
Press and hold
for 3 seconds to turn on.
1
3 sec
Press
to start cleaning in Auto Cleaning mode.
2
• To pause cleaning, press
again.
• To turn off, press and hold
for 3 seconds.
*If RoboVac is not responding when you press a button, press the Force Shutdown
button (located inside the main unit) to forcibly power off the device. Then press and
hold
for 3 seconds to restart the device.
22 EN
Switch to Power Saving Mode
• Make sure RoboVac is turned on and attached to the Charging Base.
Press and hold the two buttons (
and
) simultaneously for 20 seconds.
1
RoboVac switches to power saving mode automatically and the LED light turns
off.
To exit the power saving mode, press any button.
2
Select a Cleaning Mode
Auto Cleaning Mode
Press
to start cleaning in Auto Cleaning mode. You can also select this mode in the
EufyHome app.
• During cleaning, RoboVac will return to the auto empty station automatically
if the battery level becomes low. To resume cleaning from where it left off,
enable this feature in the EufyHome app.
• By default, RoboVac starts in Auto Cleaning mode when it is turned on.
Spot Cleaning Mode (Only Available via the EufyHome App)
In this mode, RoboVac intensively cleans a specific area with a size of 4.9 ft x 4.9 ft /
1.5 m x 1.5 m — great for concentrated areas of dust or debris. When the cleaning of a
certain zone is finished, RoboVac will automatically return to the auto empty station.
English
EN 23
Publicidad
