EUFY RoboVac LR30 Hybrid+ Manual Del Propietário página 14

English
Room Cleaning Mode (Only Available via the EufyHome App)
In this mode, your house is automatically divided into several rooms for cleaning in the
EufyHome app. You can also customize your room settings in the app. RoboVac will
clean the selected rooms only and return to the auto empty station after cleaning.
• Start Room cleaning only after RoboVac has created the map.
• It is recommended that RoboVac moves from the auto empty station to start
Room cleaning.
Zone Cleaning Mode (Only Available via the EufyHome App)
In this mode, you can set up a cleaning zone in the EufyHome app. RoboVac will only
clean the selected zone.
Select a Suction Power Level
In the EufyHome app, select a suction power level according to your needs:
• Quiet
• Standard (Default)
• Turbo
• Max
• When RoboVac starts cleaning the next time, it will clean according to the
suction power level you previously selected.
24 EN
4.9 ft / 1.5 m
Select BoostIQ™ feature
In the EufyHome app, select the BoostIQ™ feature according to your needs. RoboVac
will automatically increase the suction power if it detects that stronger power is
needed to ensure the best clean. BoostIQ™ is ideal for cleaning thicker carpets and
hard-to-sweep messes, which will reduce the total cleaning time, but increase the
noise level. If the vacuuming noise caused by BoostIQ™ disturbs you, you can disable
this feature.
Use Mopping System
• The mopping mode is only intended for a clean floor without stubborn stains
or liquids. To avoid staining floors, do not use the mopping function when
dust is mixed with liquids such as coffee or ink.
• Mopping System cleans best on smooth hard surfaces and may not perform
so well on uneven tiles, heavily waxed floors or rough surfaces like slate or
brick, which may snag the mopping module.
• The mopping mode is not recommended for use when no one is at home.
• Do not use the mopping mode on a carpeted floor. It is recommended to set
a "No-Mop" zone in the EufyHome app to avoid cleaning the carpeted area.
Before mopping, install the waterproof pad under the auto empty station to
1
protect the floor.
Remove the mopping module.
2
English
EN 25