ALPA MEGAwhiz BA010 Manual De Instrucciones página 13

EN
HOLD MODE
Press many times the [MODE] key until the menu «HOLD» is displayed. Then press the [SET] key to
switch «ON» or switch «OFF». Press [MODE] key to validate.
During measurement , press the [SET] key to freeze the value. A «H» appears in the display. A 2nd
pression on the [SET] key reactivate the dynamic value on display.
This function is useful when the display is not clearly in the field of vision.
PROXIMITY CONNECTION
The external micrometer has a contact less data output. This data output enables the direct
connection to a computer or a printer using a Proximity connection cable.
A short press on the [SET] button transmits the current value to the data connection. The indicator
send Data is briefly displayed.
For more information, see the instructions of the proximity cable.