ALPA MEGAwhiz BA010 Manual De Instrucciones página 15

NCAL DD.MM.[YY]YY
NUM?
NUM XXXX
OFF
OUT 0 / OUT 1
PRE?
PRE ±XXX.YYYYYY
?
SBY
SET?
STO?
STO 0 / STO 1
UNI?
UNI 0 / ON 1
VER?
Sets the date of the next calibration
Sends the instrument number
Modifies the instrument number (up to 10 characters)
Switch instrument OFF
Disables/enables the automatic data transmission
Sends the Preset value (±xxx.yyy[yy])
Sets the Preset value (max. 200.0mm / 8.00'')
Sends the displayed value
Stand-by
Transmits the configuration of the instrument
(IN or MM, STO0 oSrTO1, KEY0 or KEY1, BAT1 or BAT0)
Sends the display status
Unlocks/locks the display
Send the current unit of measure (IN or MM)
Locks/unlocks the Unit function
Sends the version and date of software (Vx.x DD.MM.YYYY)
EN