Publicidad
Idiomas disponibles
Idiomas disponibles
After attaching the grass catcher box,
release the pulled-out grass catcher box
release lever (1). Ensure that the lock
engages fully.
– Once locked, the grass catcher box is
firmly attached to the machine again.
8.14 Gearbox freewheel lever
The gearbox can be
disengaged (e.g. for
pushing the machine) or
engaged (for self-
propulsion) by means of the gearbox
freewheel lever.
Warning!
Risk of crush injuries!
The gearbox freewheel lever
should only be pulled out on level
surfaces, as the machine may be
set in motion.
If the machine is parked with the
gearbox disengaged, the parking
brake must always be engaged.
Note
The gearbox freewheel lever
should only be pulled out when the
ride-on mower is to be pushed.
80
Disengaging the gearbox
Pull the gearbox freewheel lever (1)
outwards to the stop.
Engaging the gearbox
Lift up the gearbox freewheel lever (1) and
then press it inwards to the stop.
8.15 Level sensor (grass catcher box)
A continuous tone sounds if the grass
catcher box is full. This signals that the
grass catcher box needs to be emptied.
Disengaging the mowing deck
stops the continuous tone.
The time for the filled grass catcher box
signal is adjusted by modifying the length
of the (grass catcher box) level sensor.
This allows you to adapt filling of the grass
catcher box to the characteristics of the
clippings.
A shorter sensor generally causes later
triggering of the signal (the grass catcher
box is filled to a greater extent, ideal for
very dry clippings).
The level sensor can be adjusted to 6
notched positions.
In delivery condition, the level sensor
(grass catcher box) is fully extended.
Adjusting the level sensor:
● Stop the engine. (
12.3)
● Engage the parking brake. (
● Remove the grass catcher box.
(
12.10)
Extend or shorten the level sensor by
moving slide (1) of the (grass catcher box)
level sensor in the direction of the arrows.
0478 193 9905 B - EN
8.10)
Publicidad
