HSM Powerline 450.2 Instrucciones De Servicio página 11

7 Cleaning and maintenance
Switch off the document shredder and disconnect
the power plug. Only clean use a soft cloth and a
mild soapy water solution. Do not allow water to
enter the equipment.
Oil the cutting unit when the
cutting capacity decreases or
the unit becomes noisy, or
every time you empty the
waste container:
• Spray special cutting apparatus oil
through the paper feed opening along
the entire width on to the cutting rollers.
• Let the cutting unit run forwards and
backwards several times without feeding
in any paper.
 This loosens paper dust and particles.
05/2022
8 Disposal/Recycling
turer, HSM would be pleased to advise you on the
disposal of your old machine.
9 Scope of delivery
• Document shredder ready for connection packed
in fi lm, machine strapped onto Euro palette with
packaging straps
• 5 waste bags
• 1 bottle of special lubricating oil for cutting head
• Operating manual
Accessories
• 25 waste sacks, order no. 1.452.995.000
• Special lubricating oil for cutting head (250 ml)
Order no. 1.235.997.403
HSM Powerline 450.2
Dispose of the machine in an environ-
mentally sound way at the end of its
service life. Observe the current regula-
tions when doing this. As legislation is
subject to ongoing changes, we request
that you contact your local authorities at
the appropriate time. As the manufac-
english
11